There are many options to consider when it comes to garage floor coatings, including metallic epoxy floor paints, metallic epoxy pigments and polyaspartic garage floors. Each of these present advantages over the other and each has its own disadvantages also. Polyaspartic garage floor coatings has become a great favorite among users of garage flooring installers because of its benefits. It achieves fast curing which many other coatings cannot achieve.
Polyurea and polyaspartic garage floor coatings are made of polyurea, which is a subgroup of polyurethane. It is formed by reacting water or polyetheramines with isocyanates to form a urea linkage. The material is hard thanks to the curing reaction resulting from the mixing of resin and catalyst.
Part of the advantages is because polyurea is more flexible than epoxy — has low to no VOC’s and an elongation rate of above 300 percent.
This product is used on interior pipe coatings, liquid containment linings and spray-on bed liners.
The coating can be applied in a more traditional manner and manages a pot life of 5 to 120 minutes depending on the formulation.
Even as you move to purchase polyaspartic garage floor coatings, understand that all polyaspartics are a polyurea, not all polyureas are a polyaspartic. polyaspartic coating
Unlike metallic epoxy floor paints and metallic epoxy pigments, polyaspartic garage floor coatings can be applied at low temperature ranges of as low as -30 degrees Farads to as high as 140 degrees Farads, depending on formulation. It means they can be applied at any time, without need to wait till spring or summer to coat your garage floor.
These flooring coatings are also applied in just two coats. The first is the primer and the color coat and the second is the clear coat. A flooring can be installed in one day and the floor used in the next day because, as we said, these types of flooring cure fast.
With epoxy flooring solutions, you will have to wait for 3 -5 days in order to put your garage into use.
These are not the only benefits of this type of flooring. It is also 100 percent U.V. stable, meaning it does not yellow. It also gives a crystal clear finish that does not blush from moisture once the concrete attracts moisture.
It manages a similarly high abrasion and scratch resistance to polyurethane and is highly resistance to heat, meaning it does not pick up a hot tire. You can also use an applicator to control the high film build-up realized. The coating also manages a high gloss finish.
It also has a high stain and chemical resistance, has good flexibility and higher impact resistance, highly resistance to chemicals and stains, and great wetting characteristics. The latter allows for good penetration into concrete, which means they form strong bond. It also gives decreased chances of formation of bubbles due to out gassing as it cures faster.